manajemen perpustakaan  oil and gas processing plant  refractory heat insulation contractor safety management system  electronic filing  IT Help desk  modern office administration
Contact US
PT.MAIRODI MANDIRI SEJAHTERA
Training, Consulting & Engineering Services
MMS BANDUNG
Telp/fax:(022)7215668 atau (022)7215416
Mobile : 0818.0940.8069 atau 0858.6026.3043 atau 0853.1854.1405 atau 0857.2376.4534 atau 0812.2145.4930 atau 0859.5639.6225 atau 0813.2205.0262 atau 0818.0960.0076

training@mairodi-training.com
ptmmsbdg@gmail.com

MMS JAKARTA
Telp/Fax:(021)4710404 Mobile : 0812.1469.9055 atau 0818.0952.2499 atau 0812.2145.4928 atau 0859.5639.6224 atau 0812.2465.7416 atau 0859.5600.9692
training@pelatihan-jakarta.com
ptmmsjkt@gmail.com

MMS YOGYAKARTA
Telp/Fax: 0274-386971 Mobile: 0877 3930 9038 atau 0856 4399 6014 atau 0852 9259 3334 atau 0878 3829 4238
training@training-yogyakarta.com
ptmmsyogya@gmail.com

MMS SERTIFIKASI
Telp/Fax022)7215668 atau (022)7215416
Mobile : 0852.2215.5409 atau 0813.1252.6663 atau 0813.2010.2231 atau 0818.0222.8095
training@training-k3.com
ptmmsk3@gmail.com

MMS BANDUNG & SERTIFIKASI
Deris
Wildan
MMS JAKARTA
Nurul Hasanah
Nurul Awalia
MMS YOGYAKARTA

Irwan

Allan
WE ALSO ORGANIZE TRAINING IN OTHER CITIES
ACCOUNTING AND FINANCE FOR NON FINANCIAL MANAGERS MANAJEMEN PERPUSTAKAAN MACHINERY VIBRATION ANALYSIS ism audit BEARING TECHNOLOGY AND ENGINE LUBRICATION SYSTEM welding inspection electrical power system protection  gas turbin  hvac system  job safety analysis

KOMPRESOR SENTRIFUGAL: OPERASI, PEMELIHARAAN, DAN TROUBLESHOOTING

Training Syllabus:

KOMPRESOR SENTRIFUGAL:

OPERASI, PEMELIHARAAN, DAN TROUBLESHOOTING

 

TUJUAN/SASARAN TRAINING:

  1. Memberikan pengertian dasar tentang teori (mekanika fluida dan termodinamika) yang berkaitan dengan kompresor sentrifugal dan instalasinya,yang akan menjadi dasar pemahaman terhadap prinsip teori , cara kerja dan karakteristik kompresor sentrifugal beserta instalasinya (sistem) dan pengertian tentang gejala gejala fisik yang terjadi pada operasi.
  2. Memberikan pengertian  tentang karakteristik kompresor sentrifugal dan instalasinya (sistem) yang menjadi dasar pengenalan terhadap sifat sifat kompresor sentrifugal dan instalasinya serta pemahaman tentang dasar perancangan sistem,pemilihan kompresor,cara pengoperasian dan perlakuan terhadap kompresor sentrifugal beserta instalasinya.
  3. Memberikan pengenalan tentang jenis jenis kompresor dan komponen komponen utama serta karakteristiknya yang menjadi dasar pemahaman tentang konstruksi dan daerah kerja (kondisi operasi) kompresor.
  4. Memberikan dasar cara cara perawatan dan mengatasi masalah pada kompresor sentrifugal dan instalasinya
  5. Dengan semua hal di atas dan pengalaman peserta ,pada akhirnya para peserta pelatihan akan/diharapkan mempunyai  kemampuan mengoperasikan sistem dengan baik,mengenali gejala gejala yang terjadi selama operasi,merawat dan mengatasi masalah yang timbul pada operasi sistem kompresor sentrifugal ;dengan dilengkapi pengertian dasar perancangan sistem.

 

CAKUPAN MATERI TRAINING:

  1. Dasar Teori Mekanika Fluida dan Termodinamika
    • Sifat sifat fisik dan termodinamik fluida (kompresibel) yang relevan
    • Dasar aliran fluida (kompresibel)
    • Dasar dinamika fluida
    • Dasar proses energi pada fluida
    • Kehilangan (losses) energi pada instalasi
  2. Dasar Teori Kompresor Sentrifugal dan Instalasinya
    • Kebutuhan energi (head) dan tekanan pada instalasi
    • Prinsip pemindahan energi pada kompresor sentrifugal
    • Karakteristik instalasi dan kompresor (kapasitas, tekanan,efisiensi)
    • Kombinasi antara instalasi dan kompresor
    • Spesifikasi kompresor
    • Pemilihan  kompresor (dengan dasar kapasitas,tekanan dan efisiensi kompresor)
    • Perubahan sifat fisik gas pada proses didalam instalasi
  3. Gejala Gejala Kritis/Berbahaya pada Operasi
    • Tekanan berlebih
    • Tekanan negatif
    • Temperatur berlebih (overheat)
    • Fuktuasi tekanan
    • Kondisi off design
  4. Operasi
    • Prosedur menjalankan dan menghentikan kompresor
    • Pengaturan kapasitas
    • Pencegahan bahaya
    • Operasi otomatik
  5. Perawatan/Pemeliharaan
    • Pemeriksaan pendahuluan
    • Pemeriksaan kondisi operasi
    • Mengatasi gangguan

VENUE :   Hotel Golden Flower, Bandung

INSTRUCTOR :  Ir. I Nengah Diasta, M.Eng.

TRAINING DURATION :   4 days

TRAINING TIME  :

  1. 4 – 7 February 2013
  2. 25 – 28 March 2013
  3. 22 – 25 April 2013
  4. 10 – 13 June 2013
  5. 15 – 18 July 2013
  6. 16 – 19 September 2013
  7. 11 – 14 November 2013

INVESTATION PRICE/PERSON :

  1. Rp 7.750.000/person (full fare)  or
  2. Rp 7.500.000/person (early bird, payment 1 week before training)  or
  3. Rp 7.250.000/person (if there is 3 persons or more from the same company)

FACILITIES FOR PARTICIPANTS:

  1. Training Module
  2. Flash Disk contains training material
  3. Certificate
  4. Stationeries: NoteBook and Ballpoint
  5. T-Shirt
  6. Bag
  7. Training Photo
  8. Training room with full AC facilities and multimedia
  9. Lunch and twice coffeebreak everyday of training

10. Qualified instructor

11. Transportation for participants from hotel of participants to/from hotel of training (if minimal number of participants from one company is 4 persons)

 

TRAINING INSTRUCTOR

Ir. I Nengah Diasta, M.Eng.  is graduated from Bandung Institute of Technology (ITB), and till now he is a lecturer at mechanical engineering Bandung Institute of Technology majoring on fluid mechanics and fluid machineries. He has followed many courses for his competencies supporting, such as Application of Pumps and Turbines in Industries, Industrial Application of Fluid Machinery, Drafting of Patent Applications, Computational Fluid Dynamics, Turbo Pumps and Turbines, Application of Turbo Type of Fluid Machinery, Industrial Application of Pumps and Renewable Energies, Effective Energy Systems For Preservation of The Environment, Application of Fluid Machinery Focused on Energy Conservation, and etc.

Ir. I Nengah Diasta, M.Eng.  has much experiences in real practical work in project implementation and has collaborated with many institution and companies.

Ir. I Nengah Diasta, M.Eng.  has been frequently teaching training class for many companies in Indonesia on some topics in his core expertise such as Pump Operation and Maintenance, pump and compressor, pneumatic system and maintenance, compressor and gas turbine, Centrifugal Pump: Selection, Operation, and Maintenance, Centrifugal Gas Compressor: Anti Surge Control, Hydraulic Power System, Gas Compressor and Anti Surge Control, Service & Maintenance for Fixed Machines, Rotating Equipment, Gas Compression System and Operation, Basic Rotating Machinery as Program on Basic Maintenance/Generalities for Control System Supervisor Training, Fundamentals of Pipeline Hydraulic, Gas Pipeline Hydraulic, Aplication of Termo-Fluid in Manufacture Industry, and etc.  Many Indonesian companies training participants have been taught by him such as PT PERTAMINA, PT Pupuk Kaltim, PT TELKOM, ARCO, PT.CALTEX,  Total E&P Indonesie, CONOCOphillips, PT PLN (Persero), PT Pupuk Kujang, Arun, PT Badak, PT Semen Andalas, PT TGI, PT Astra, PT CPI, CNOOC SES Ltd, and many others.

Tagged with:
Posted in Maintenance, Mechanical, Rotating Equipment, Technical And Engineering, Teknik

Form Registrasi Training

DATA TRAINING
  1. (required)
  2. (required)
DATA PERSONAL
  1. (required)
  2. (required)
  3. (required)
  4. (valid email required)
  5. (required)
Data Pre Registrasi (Tidak Mengikat)
Pesan Untuk Penyelenggara Training
  1. Captcha
 

cforms contact form by delicious:days